Overview
The following table describes the standard features. Download the PDF for a more complete version of this table.
| |
Kit-2 |
| Features |
|
| TRITON socket |
2 x 100 pin SAMTEC |
| Supported TRITON's |
ETN, LP |
| Compact Flash socket |
Yes |
| CF supported modes |
IDE, CF |
| Ethernet |
on TRITON-ETN, -LP |
| RS232 |
Yes |
| JTAG LPT connector |
Yes |
| JTAG ICE connector |
Yes |
| JTAG-Booster connector |
Yes |
| USB host connector |
Yes |
| USB device connector |
Yes |
| UCB1400 CODEC |
No |
| IrDA transceiver |
Yes |
| |
|
| Expansion: |
|
| LCD : 40 pin header connector |
Yes |
| LCD : 4" Toshiba connector |
Yes |
| Pre-decoded chip select signals |
Yes |
| Buffered address and data bus |
Yes |
| All pins of TRITON available |
via flat cable headers |
| Daughterboard slot for easy design-in |
Yes |
| |
|
| Power: |
|
| Disconnectable TRITON power supply for power consumption measurements |
Yes |
| 3.3V single supply design |
Yes |
| 5 V available |
Yes |
| Power input |
12 VDC |
| |
|
| Misc: |
|
| Temperature range |
0 to +70 degC |
| Dimensions |
160 x 100 mm |
| Carrier board schematics supplied |
Yes |
| |
|
|
Operating Systems
The Development Kits are supplied with Linux.
Note that the OS is only normally pre-installed in the TRITON Flash memory when a Development Kit is supplied. When modules only are ordered, the OS is not pre-installed unless ordered as an option.
RedBoot
Modules are always supplied with pre-installed Redboot firmware. Redboot supports several low-level-debugging options and file download via serial XModem or FTP via ethernet. These files can additionally be stored into the permanent flash-memory to be started by command or power-on.
Links
|
|
